Last Updated on September 6, 2023
Do you own a textured shower stall floor that is dirty and grimy? Do you find it difficult to remove the grime and dirt buildup? Cleaning showers can be daunting and time-consuming. With the right methods, you can easily clean your textured shower stall floor in a fraction of the time.
From Vinegar and Dawn dish soap to baking soda, hydrogen peroxide, bleach, Oxyclean powder, Coca-Cola, oven cleaner, and even commercial non abrasive cleaners, you have plenty of effective options for deep cleaning your shower stall.
All these techniques are easy to use and can quickly restore the sheen of your textured shower stall in a fraction of the time it would take to scrub it clean. Discover 8 tried-and-true methods of achieving clean and sparkly results with minimal effort.
How To Clean Textured Shower Stall Floor: 8 Effective Methods
Keeping your textured fiberglass shower floor tile free from dirt and grime is essential to enjoying a clean, healthy bathroom. With the right cleaning solution, you can witness amazing results. Try out from white vinegar to commercial non-abrasive cleaners to tackle stubborn grime to tougher stains.
Method 1: Vinegar with Dawn Dish Soap:
Vinegar and Dawn dish soap is essential for getting rid of dirt, grime, and other stubborn substances. It is important to use the right combination of cleaning ingredients to ensure that even tough stains are removed.
Step 1: Start by vacuuming up any loose debris on the floor of your shower stall using an attachment specifically designed for this job.
Step 2: Mix equal parts white vinegar and warm water in a bucket and use a microfiber cloth or mop head to apply the mixture to the entire surface of your shower stall. Allow this mixture for approximately 15 minutes before wiping it away with another dry cloth or mop head.
Step 3: After cleaning with vinegar and Dawn dish soap solution, spray down your entire shower stall with an antibacterial cleaner such as Lysol or Clorox Disinfectant Spray. This will help kill any bacteria that might still be living on the surface after being cleaned.
Step 4: Rinse off any remaining soap residue with warm water from a bucket or hose attachment on a sink faucet. Make sure to get into all nooks and crannies for an effective cleanse so no dirt is left behind on the surface of your textured shower stall flooring material.
Method 2. Baking Soda, Vinegar and Dawn Soap:
Baking soda, vinegar, and Dawn are some of the most effective ingredients for tackling soap scum and stubborn stains.
Step 1: Begin by sweeping away dirt and debris from the surface of the fiberglass shower floor. This will remove any hair, dust, soap residue, or other particles from the grout lines or textured surface.
Step 2: Make a solution of equal parts baking soda and vinegar in a bucket or bowl, using approximately one cup of each ingredient for every square foot of space that needs to be cleaned. Stir vigorously until it’s combined into a paste-like consistency.
Step 3: Spread this solution evenly throughout the entire area that you want to clean using a sponge or cloth. Let it sit for about 10 minutes before scrubbing in circular motions to work it deep into any texture or crevices on the surface of the shower floor.
Step 4: Once you have finished scrubbing, rinse away all traces of baking soda and vinegar with warm water and allow to air dry completely before proceeding further.
Step 5: For tougher soap scum or hard water stains, pour some Dawn directly onto these spots in order to break through them more quickly and efficiently. Allow it to sit for up to 15 minutes for best results before scrubbing once more with your sponge or cloth.
Step 6: Rinse again with warm water until no traces of soap remain on the fiberglass shower floor surface before allowing it to air dry fully before using it again. Additionally, during this rinsing step, you may wish to add some disinfectant cleaner in order to completely sanitize the area if desired.
Method 3. Hydrogen Peroxide:
Cleaning a textured fiberglass shower floor can be difficult and time-consuming. To get rid of tough stains and dirt, many people use hydrogen peroxide to clean their shower floors.
Step 1: Start by making sure the shower floor is free from any visible dirt or debris. Make sure also to remove any soap scum or mildew that may have built up over time.
Step 2: Prepare the hydrogen peroxide solution by combining equal parts of hydrogen peroxide and warm water in a spray bottle or bucket. Mix it until it becomes a homogenous solution.
Step 3: Once prepared, spray the solution onto the entire surface of the textured fiberglass shower floor using a scrub brush or microfiber cloth. Scrub lightly but firmly until you see suds forming on the floor’s surface.
Step 4: Allow the solution to sit for five minutes before rinsing it off with cold water in order to avoid discoloration of the surface caused by prolonged contact with heat and sunlight during cleaning.
To remove tough stains, wait for 15 minutes before scrubbing it off with a soft brush or cloth using circular motions until all stains are removed.
Step 5: Dry off any excess moisture from both sides of the textured fiberglass with a lint-free cloth or towel until no moisture remains. This is an essential step in order to prevent deterioration or discoloration over time due to excessive dampness left behind after cleaning.
Note: Don’t use Ammonia Solution or scouring powder.
Method 4. Bleach Paste:
Cleaning a textured fiberglass shower floor with bleach is an important process to help keep mildew stains at bay. Using the correct methods can help ensure that the cleaning job is done efficiently and effectively.
Step 1. Gather Supplies:
Before you begin, make sure you have everything you need to get the job done correctly. You will need a pair of rubber gloves, a bucket, a soft brush or sponge, warm water, detergent, and bleach.
Step 2. Prepare the Shower Floor:
Start by thoroughly rinsing all surfaces of the textured shower floor using warm water and detergent. This will remove any dirt or debris that could interfere with the cleaning process and prevent proper contact between the cleaner and mildew stains.
Step 3. Apply Bleach Solution:
Once all surfaces are rinsed clean, mix one part bleach with five parts water in a bucket to create a bleach solution. Now use either your brush or sponge to apply this solution directly onto any mildew stained areas on the textured fiberglass shower floor surface.
Step 4. Wait for 10-15 Minutes:
Give the bleach solution 10-15 minutes to penetrate deep into each affected area to efficiently remove mildew staining from your textured fiberglass shower floor. Afterward, you can use a brush or sponge as needed for extra scrubbing of deeper marks and stains.
Step 5. Rinse Thoroughly & Dry Completely:
Make sure to give your fiberglass shower floor surface a thorough rinse with warm water after scrubbing off mildew stains. To finish, dry it off using specialized towels or cloths so that no cleaning residue is left behind.
Method 5. OxyClean Powder (Oxalic Acid):
OxyClean powder for tough stains is an essential cleaning product to keep textured shower pans or floors clean. It uses oxalic acid, a natural cleaner that breaks down dirt and grime, to penetrate deep into the surface of the tiles.
Step 1: Don the gloves, goggles, and other protective gear. It’s caustic enough that direct contact can cause skin irritation, while the pressure of a spray could land it in your eyes.
Step 2: Begin by mixing three parts warm water with one part OxyClean powder in a bucket. This solution needs to be mixed until all the powder has been dissolved.
Step 3: Use a sponge or a brush to apply the mixture onto the tiles you want to clean. Make sure to coat every inch of each tile with an even layer of the mixture.
Step 4: Now let the solution sit on each tile for 24 hours so that it can penetrate deep into the surface and break down any stubborn dirt or grime.
Step 5: After a day has passed, begin scrubbing each tile using your sponge or brush. This process should help lift away any tough stains that may be present on each tile’s surface without damaging them in any way.
Method 6. Coca Cola for Mildew Stains:
Coca Cola is an effective and affordable option to use for removing these unsightly marks. Here is a step-by-step guide to cleaning textured shower pans or floors using Coke for mildew stains.
Step 1. Applying the Coca Cola:
Pour Coca Cola onto the stained areas liberally until they are completely covered with the drink. You should let it sit for a few minutes so that it has time to penetrate into the surface of the textured material, as this will help to break down and eliminate stains more effectively.
Step 2. Scrubbing Gently:
Start by using soft bristles in circular motions to buff away dirt and grime, taking care not to apply too much pressure as you go.
Step 3. Rinsing Away Residue:
Rinse away any residue left behind by the Coke by using warm water which has been added into a spray bottle. Spray over affected areas and use a damp cloth or rag to wipe away any remaining residue and allow them to dry completely.
Method 7. Oven Cleaner for Stubborn Grime:
Oven cleaner is a great option for tackling stubborn grime and taking the proper steps to ensure success is essential.
Step 1: Put on protective gloves, safety glasses, and a dust mask before beginning the cleaning process. This is important to protect your hands, eyes, and lungs from the caustic fumes in the oven cleaner.
Step 2: Apply oven cleaner in an even layer over the stained area of the floor. Make sure not to soak or apply too much as it could damage or discolor the surface. Leave it on for 10-15 minutes so it has time to penetrate any dirt or grease on the shower floor.
Step 3: Use a stiff bristle brush or scrubber pad to scrub away all of the dirt or grime that has been loosened by the oven cleaner. You may need to use several passes of scrubbing to get rid of all residue and make sure to clean both sides of each tile for full coverage.
Step 4: Rinse off all remaining oven cleaners with warm water using either a cloth or mop head attachment on a broom handle. Be sure to rinse thoroughly as leaving any residue in place could damage the fiberglass surface over time.
Step 5: Dry off your shower floor with a towel after rinsing and make sure no moisture remains behind, as this could cause mold growth later on down the road.
Method 8. Commercial Non-abrasive Cleaner:
Commercial non-abrasive cleaners such as CLR, Kaboom, Comet and Mr. Clean Magic Eraser are some essential items to keep your shower clean and free of grime and dirt. Here are some simple steps you should follow when using this type of cleaner:
Step 1. Remove any debris or residue from your shower pan or floor before beginning. This will help ensure that you get a deep clean and avoid clogging up the texture with dirt and grime.
Step 2. Spray the commercial non-abrasive cleaner over your surface. Make sure to apply it evenly so that all parts of your textured shower pans or floors are covered in the solution.
Step 3. Leave it on your surfaces for at least 15 minutes so that it can work its magic and break down dirt and grime.
Step 4. Use an old toothbrush, sponge, or scrubber to scrub away as much residue as possible from your textured shower pans or floors. You may need to go over certain areas multiple times if there is a lot of stubborn dirt build-up.
Step 5. Once all of the residual dirt has been removed, rinse off your surfaces with warm water to remove any excess cleaner and residue left behind by scrubbing.
Step 6. After rinsing off with warm water, wipe down your surfaces with a dry cloth or towel right away to prevent any lingering moisture from seeping into your texture and causing damage or discoloration over time.
Can You Use a Magic Eraser On a Textured Shower Stall Floor?
It is possible to use a Magic Eraser on a textured shower stall floor. This type of cleaning product can be effective for removing dirt and grime from the textured surface.
How Do You Clean Textured Plastic Shower Floors?
The best method for cleaning a textured plastic shower floor or tray is to use a mixture of vinegar and Dawn dish soap diluted with water. The vinegar provides a natural disinfectant while the Dawn dish soap helps lift away dirt and grease from the textured surface.
Can You Refinish the Bottom of a Fiberglass Shower?
Give your fiberglass shower a new life with proper preparation and attention to detail. Before refinishing, make sure that any old sealants have been removed downstairs.
Small holes or cracks can be easily repaired using fiberglass resin before sanding down the surface of your shower until smooth. Finish it off by applying primer, paint, or a clear coat according to what look you’d like.
How Do Professionals Clean Fiberglass Shower Stalls?
Professionals trust a blend of vinegar and Dawn dish soap for cutting through built-up grime on fiberglass surfaces without causing damage. This combination creates an effective cleaning agent strong enough to break down dirt, grease, and stains.
Get Your Textured Shower Stall Floor Looking Like New Again
A good clean of your textured shower stall floor not only keeps it looking brand new but also helps ensure proper hygiene levels. From Vinegar with Dawn Dish Soap to Oven Cleaner, all these methods are simple yet effective solutions for giving your textured shower stall a deep clean quickly and efficiently.
The best thing about these methods is that they require minimal effort yet give outstanding results. Always read any instructions with products carefully before using them to ensure their proper use. Achieve a refreshed, revitalized look with the effortless care of your shower stall floor.