Bring the shine back to even the most textured of fiberglass tubs with just a few easy steps. Gather up natural materials and create cleaning solutions, then get scrubbing and rinsing like a pro. You’ll be able to make your tub shine again.
Also, you can use plenty of simple, homemade solutions to get your bathtub squeaky clean and sparklingly shiny in no time. From liquid cleansers to baking soda solutions and vinegar and dish soap mixtures, many natural ingredients can help you get the job done quickly and efficiently.
We’ll review what you should do to keep your tub in top condition. Get your supplies and come along as we explore how to clean fiberglass tubs with textured bottoms.
How to Clean Fiberglass Tub With Textured Bottom: 6 Steps
Cleaning fiberglass tubs can be tricky due to their slick surfaces and textured bottoms. However, with the right materials and techniques, you can easily tackle this cleaning job and make your tub look brand new.
Follow these steps to clean your fiberglass tub:
To begin, collect all of the materials you’ll need for cleaning your fiberglass tub. You’ll need the following:
- An all-purpose cleaner (or you can use a homemade cleaning solution),
- A scrub brush or sponge (An electric scrubber will perform best),
- Scouring powder,
- Rubber gloves,
- Microfiber cloths or towels,
- Clean rags, and
- A bucket filled with warm water.
For safety purposes, make sure to wear rubber gloves when you’re working with any chemicals. With these supplies, you’re ready to begin cleaning your fiberglass tub.
Mix together a liquid tub cleanser with warm water into a bucket using equal parts of both ingredients. Next, stir up the solution until it is completely combined, and then dip your scrub brush or sponge into it until it is completely saturated.
Remember that using too much soap could cause soap scum on your tub, which will be harder to clean later down the line, so use just enough cleaner for effective results without over-soaping.
Before beginning any scrubbing process, spray your entire fiberglass tub thoroughly with the cleaning solution from top to bottom, including all of its intricate crevices and folds.
Make sure you cover each area equally before moving on, as this will ensure better overall cleaning results during subsequent steps. Leave this solution sprayed on for a few minutes before moving on to any further steps.
Once you have left your spray-on cleaner on long enough, it is time to start scrubbing away all that dirt and grime. Using a scrub brush, sponge, or electric scrubber, start working around in circular motions over each section of your fiberglass tub to lift away tough stains.
Use a scouring powder to get those tough spots free from dirt buildup if necessary. Be sure not to use too much pressure when rubbing so as not to scratch up any part of your beloved bathtub.
After successfully removing any dirt or grime from your bathtub’s surface, rinse all sections thoroughly so that no residue remains from any soap or detergent used earlier in the process.
Ensure that each area is adequately reached during this step since leaving behind even small amounts of detergent could result in soap scum forming later on, which would require further scrubbing efforts to rinse off thoroughly again correctly next time around.
Finally, once all areas are sufficiently rinsed off, dry them off using either microfiber cloths/towels or some old rags/newspapers lovingly left lying nearby (always good for quick cleanup moments).
Pay special attention while drying since leaving behind moisture could lead to mildew build-up down the road if exposed enough times, which is not something anyone wants to happen after all this hard work.
Drying off also helps give back just a little bit more sparkle & shine back into what was already a beautiful piece of modern art.
Several effective methods are available for scrubbing away dirt, grime, and soap scum from fiberglass bathtubs with textured bottoms. Here are some of the most common ways to clean:
Electric scrubbers are a great way to clean texture-bottomed fiberglass bathtubs. An electric scrubber is a motorized brush with adjustable settings that allow you to choose the right strength for the job.
To use an electric scrubber on a textured bottom fiberglass tub, choose a setting that won’t cause any damage to the surface and then work in circular motions over the area. This should remove any dirt or grime that may have built up over time.
Liquid tub cleansers are another excellent option for cleaning textured bottom fiberglass bathtubs. Simply spray or pour the liquid onto the surface of your tub and let it sit for about 15 minutes before scrubbing away with either a sponge or clean cloth rag.
For tougher stains, use an abrasive pad if necessary, but be sure not to scratch the surface of your tub. When you’re done, rinse all residue with warm water and marvel at how sparkling clean your tub is.
For those looking for more natural options, homemade solutions are also effective when cleaning textured bottom fiberglass bathtubs.
Combine one part baking soda with two parts water in a bowl until it forms a paste-like substance, and then apply this mixture directly onto the tub surface using either a sponge or cloth rag.
Scrub gently in circular motions until all soap scum and dirt has been removed from the surface before rinsing off with warm water.
Finally, if all else fails, you can always try using vinegar and dish soap as an effective cleaning solution to remove tough spots on textured bottom fiberglass bathtubs.
Simply mix equal parts vinegar and dish soap into a bowl until they form into foam and then apply directly onto that area where there may be stubborn buildups such as soap scum or mildew buildup etc.
Now let sit it for 10-15 minutes before lightly scrubbing away gently in circular motions using either a soft sponge or cloth rag before rinsing off thoroughly with warm water afterward, again afterward marveling at how clean your tub looks.
When cleaning your fiberglass bathtub with a rough bottom, all-natural cleaners can be just what you need. Not only are they better for the environment, but they’re also gentle on your skin and won’t irritate any existing allergies or sensitivities.
The best all-natural cleaner for your rigid tub is undoubtedly white vinegar. It’s easy to find, affordable, and incredibly effective at removing dirt and grime from even the toughest surfaces.
Another great option is baking soda. Its mild abrasive properties make it perfect for removing stubborn stains without causing damage to your delicate tub’s finish.
You should avoid abrasive steel wool pads when cleaning your textured bottom fiberglass bathtub. Steel wool is a material made up of thin steel fibers woven together, which can be very abrasive and cause damage to the delicate surface of your bathtub.
The texture of the bottom of a fiberglass bathtub can easily be scratched or scraped away with the use of steel wool. Not only can this make your bathtub look bad, but it can also allow water and dirt to accumulate in the scratches and make it harder to clean and more prone to bacteria growth.
You can use a soft scrubber to clean fiberglass bathtubs. Soft scrub is a gentle cleanser from non-abrasive ingredients like baking soda and biodegradable surfactants. It won’t scratch the surface of your fiberglass bathtub, so it’s safe to use.
To clean your tub, start by wiping down the surface with a damp cloth to remove any dirt and debris. Then, apply soft scrub directly onto the tub’s surface using a sponge or brush. Scrub in small circles, working your way around the tub until it’s been covered evenly with the cleanser.
Cleaning your fiberglass shower tub with a textured bottom may seem daunting, but by following these easy steps, you can quickly get rid of dirt and stains and restore its lustrous appearance without spending too much time or money.
Make sure to gather all the necessary cleaning supplies before you begin and prepare an effective cleaning solution to do the job correctly. You may use specific cleaning materials such as liquid cleansers, baking soda solutions, vinegar, or dish soap.
Once everything is ready, spray it on the surface and scrub away any dirt or grime before rinsing the solution with water and drying it off with a soft cloth. With just a few minutes of effort, your fiberglass tub will be sparkling clean.