Clean Curious

Clean Today for a Better Tomorrow

How to Remove Candle Wax from a Bathtub: DIY 3 Steps [Super Easy]

How to Remove Candle Wax from a Bathtub

Last Updated on March 2, 2023

Candles can really set the mood for a luxurious bath. But dripping the wax over your bathtub doesn’t give your bathroom that inviting look. Don’t worry, though, you can easily restore it to its former glory.

All you need is an ice cube and either a butter knife or a plastic scraper. Let the icy magic work by rubbing away at any excess wax until it hardens up. Now use your trusty scraping tool to gently scrape off all those stubborn remnants of candle-wax fun times gone by.

You can also use Isopropyl alcohol, a commercial stain remover, or even a hydrogen peroxide and baking soda mixture to help eliminate stubborn candle wax stains from your bathtub surface.

Get ready for luxurious baths minus the mess. We’ll guide you through every step along this miraculous transformation journey.

How to Remove Candle Wax from a Bathtub: 3 Steps

candle jar

Forget annoying candle wax in the tub. With these easy steps, you’ll be back to a sparkling bathtub faster than you can say “wax-free.” So grab your cleaning cloth, and let’s get that mess removed.

Step 1: Gather Necessary Items

When removing wax from a bathtub, you need to gather the necessary items before you begin. For this task, you will need a butter knife or plastic scraper and an ice cube.

The ice cube is used to help solidify the wax so that it can be scraped off more easily. And the knife or scraper is used to actually scrape the wax away. Make sure to use only non-abrasive materials in order to protect your tub’s surface.

Step 2: Rub the Wax with Ice Cube

Once you have your supplies, start by rubbing the candle wax with an ice cube. You may need to do this for several minutes for it to solidify enough for scraping. 

A bathtub with a candle wax stain

After it has solidified, you can scrape away the wax from your bathtub surface. Start by lightly pressing the ice cube onto the wax and moving in a circular motion until most of it has been frozen over.

Step 3: Scrape the Wax

Once you’ve frozen most of the wax, take your plastic scraper or butter knife and carefully begin scraping away at it.

Be careful not to press too hard, as you could damage your bathtub’s surface. To avoid damage, make sure that you apply only light pressure while scraping away at the wax.

If using a butter knife, make sure that all of its edges are dull so as not to create unnecessary damage when you scrape.

Cleaning the bathtub after removing candle wax

When all of the wax has been removed from your tub’s surface, use a damp cloth or paper towel to wipe off any remaining residue before rinsing thoroughly with warm water.

Afterward, be sure to dry off completely before applying any additional treatments, such as cleaning products or sealants, on top of what remains of your bathtub’s finish.

Methods to Remove Candle Wax Stain from a Bathtub

hardened wax

After you’ve removed the wax from your tub, it’s time to tackle the stain that remains.

Candle wax can leave behind a stubborn mark on some surfaces, so this step is important to restore your bathtub’s original look and feel. Below are some different methods to take out candle wax stains from a bathtub:

Collect Necessary Stuff

Ready to tackle a candle wax stain in your bathtub? Gather the essential items, and you’ll be ready for action. Depending on which method you choose, different materials will come into play.

Isopropyl alcohol, paper towel, stain remover, hydrogen peroxide, and baking soda could all do the job. Success is guaranteed if used correctly.

Use Isopropyl Alcohol to Remove Candle Wax Stains from Bathtub

Step 1: Soak a Paper Towel with the Isopropyl Alcohol 

To start, take a paper towel and saturate it with isopropyl alcohol. Make sure the paper towel is completely soaked but not dripping wet. This should help the leftover wax stain to dissolve and render it easy to remove from the bathtub surface.

Step 2: Wring the Paper Towel 

Once you’ve got your paper towel soaked, make sure to wring out all of the excess liquid so that it’s only damp, not dripping wet. The goal here is to avoid excessive moisture to prevent any further deterioration or staining of your bathtub surface.

Scrape off candle wax from the surface of a bathtub

Step 3: Leave the Wet Paper Towel 

Now that your paper towel is dampened, press it firmly on top of the candle wax spot in your bathtub and leave it there for several hours.

It helps dissolve and loosen up the wax stain. Make sure not to move or disturb this spot at all during this time, as this could further spread or smudge the wax into other parts of your tub.

Step 4: Repeat the Process With a New Paper Towel 

Once you leave your first dampened paper towel on top of the wax stain for several hours, repeat this process with a new one until all traces of wax stain have been removed from your bathtub’s surface.

Scrape off candle wax from the surface of a bathtub

It’s crucial here that you replace each used paper towel regularly so that no extra filth is transferred onto your tub during cleaning.

Keep repeating this process until all evidence of candle wax stain has been removed. Then rinse the bathtub with warm water.

Remove Candle Wax Stain from Bathtub Using Stain Remover

hot wax

You can also try using a stain remover for those hard-to-remove stains. Below are the steps to get this done:

Step 1: Apply the Stain Remover Over the Stain

You have to apply the stain remover evenly and carefully over the candle wax stain. If you have a powder form of the stain remover, mix it with water first to create a paste.

Read the instructions on your product label and follow them accordingly. When using a liquid form of stain remover, apply it according to the manufacturer’s instructions.

Be sure to use gloves while applying this product, as it may irritate your skin if you come in contact with it directly.

Step 2: Scrub and Wait

Once you’ve applied the stain remover over the wax stain, it’s time to start scrubbing. Use a sponge or soft cloth to gently rub away any residue left behind by the wax stain.

You want to be careful not to scratch or damage your bathtub’s surface while scrubbing. After that, leave the stain remover on for around 15 minutes to do its job properly and effectively remove all traces of wax from your bathroom surface.

Step 3: Wipe Off and Rinse with Water

After waiting for 15 minutes, grab a damp cloth and wipe off any residue. This may include some of the original wax stains and any soap scum removed when applying it earlier.

Finally, rinse any remaining products with warm water and check that your bathtub is clean again. If there are still visible traces of wax left behind after all these steps, repeat Step 2 until they are completely gone before rinsing one last time with warm water.

Use Hydrogen Peroxide with Baking Soda Mixture

Use Hydrogen Peroxide with Baking Soda Mixture

If you’re looking for a natural way to clean candle wax from your bathtub, try combining hydrogen peroxide with baking soda. This mixture can help break down and dissolve the paraffin wax stain, making it easier to scrub away.

Step 1: Sprinkle Some Baking Soda Over the Stain 

Start by sprinkling some baking soda directly over the candle wax stain. This will help to absorb any excess moisture and create a barrier between the stain and your bathtub.

Step 2: Spray the Hydrogen Peroxide Over the Baking Soda

Once you have sprinkled the baking soda, take a spray bottle filled with hydrogen peroxide and spray it onto the top of the baking soda.

Cleaning the bathtub after removing candle wax

This will help to break down the spilled wax stain. Make sure to cover all areas evenly so that all of the wax is removed.

Step 3: Let it Sit

After spraying on the hydrogen peroxide, let it sit for 10-15 minutes. During this time, you will notice bubbling and fizzing as it works to dissolve away the wax stain. This is a sign that it’s working and should be left alone during this time.

Step 4: Wipe Off and Rinse

After 10-15 minutes, take a damp cloth or sponge and wipe away any remaining residue from where you applied baking soda and hydrogen peroxide.

Once you have wiped away all of the residues, rinse off your bathtub with warm water to make sure that no more melted wax remains behind.

Can You Use Paint Thinner for Removing Wax Stain from a Bathtub?

You can use paint thinner to remove wax stains from a bathtub. First, apply a small amount of paint thinner to the stained area and let it sit for a minute.

Cleaning the bathtub after removing candle wax

Then, use a damp cloth with plain water to wipe away the stain. When using paint thinner, ensure that you do so in a well-ventilated area, as the fumes may be hazardous.

Does Magic Eraser Remove Candle wax from Bathtub?

Does Magic Eraser Remove Candle wax from Bathtub

You can use a magic eraser to remove candle wax from your bathtub. All you need to do is dampen the eraser and gently rub it over the wax until it lifts off.

You may need to repeat this process several times for tougher stains. If the wax has left a color stain behind, you can try using a small amount of rubbing alcohol or a magic eraser to get rid of it.

Will Bleach Dissolve Candle Wax From Bathtub?

Bleach can be used to dissolve candle wax from a bathtub. But using bleach is not recommended for removing candle wax from bathtubs as it may damage certain surfaces.

Will Bleach Dissolve Candle Wax From Bathtub

Instead, consider using a commercial wax remover specifically designed to safely and effectively dissolve candle wax on porous or non-porous surfaces. Alternatively, you could also try the methods we talked about.

Tackle Candle Wax Messes with Ease

Removing candle wax from a bathtub can be an easy task if done correctly. Start by softening the wax with an ice cube and then scraping away as much as possible using a plastic scraper or butter knife.

If the stains remain, try using a mixture of hydrogen peroxide and baking soda to lift away any stubborn residue. Lastly, for tough stains, use a stain remover or isopropyl alcohol to dissolve away any remaining residue.

With these tips in mind, you should have no problem getting rid of any candle wax mess in your bathtub.

How to Remove Candle Wax from a Bathtub: DIY 3 Steps [Super Easy]

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top