Last Updated on October 17, 2023
Purple shampoo stains on your shower walls can be quite stubborn, but there are effective methods to tackle this issue and make your bathroom look pristine again.
There are a lot of solutions at your disposal, such as white vinegar, baking soda and vinegar, bleach and water, oxalic acid, and even commercial stain removers.
The process involves preparing your chosen cleaning agent, applying it to the stain, allowing it to sit and penetrate, and then gently scrubbing the area.
We will discuss in detail how to remove purple shampoo stains from the shower using different methods so you can pick what suits you best.
How to Get Purple Shampoo Stain Out of Shower: Step-By-Step Guide
If you have a purple shampoo stain in your shower, you can use different methods to get rid of it. Only white vinegar, vinegar mixed with baking soda, bleach and water solution, oxalic acid, and commercial stain removers work.
Here are four simple steps to help you remove it using these methods:
Step 1: Prepare the cleaning agent
Step 2: Apply the cleaning solution
Step 3: Let it sit
Step 4: Scrub and rinse
Let’s discuss each step in detail with all the methods to eliminate purple shampoo stains in detail.
Step 1: Prepare the Cleaning Agent
To get the purple shampoo stain out of your shower, the first step is to prepare the cleaning agent. Depending on your chosen method, there are different ways to do this.
For the white vinegar and water method, mix equal parts white vinegar and water in a bowl. This solution will help break down and lift the purple shampoo stains.
Alternatively, you can use baking soda and vinegar. To prepare this cleaning solution, mix equal parts of baking soda and vinegar in a bowl to form a paste. Combining these two will make a gentle abrasive cleaner.
Another method is to use bleach and water solution. You can prepare this cleaning solution by mixing 1 cup of bleach with 1 gallon of water in a well-ventilated area. You should wear gloves and eye protection when working with bleach.
If you prefer to use oxalic acid, mix a small amount of oxalic acid with water to create a paste.
Also, you can use commercial stain removers to prepare the cleaning agent. It depends on the product format, so follow the instructions on the product label.
Step 2: Apply the Cleaning Solution
Once you’ve prepared the cleaning agent, it’s time to apply the solution to your shower’s stained areas.
For the white vinegar method, dip a soft sponge or brush into the mixture and gently apply it to the stain to saturate it completely.
If you’re using the baking soda and vinegar method, use a sponge or brush to apply the paste onto the stain, ensuring full coverage.
When using the bleach and water method, apply the solution to the purple shampoo stain on the shower wall using a sponge or a brush. Avoid contact with your skin and eyes when applying bleach to purple shampoo stains.
If you choose to use oxalic acid, apply the paste to the purple shampoo stains using a sponge or brush. Alternatively, spray or apply the commercial stain remover directly onto the purple shampoo stain.
Step 3: Let It Sit
Once you have applied the cleaning solution, it is time to let it sit. For the white vinegar method, allow the vinegar solution to sit on the stain for about 10 to 15 minutes. This will give it time to penetrate and loosen the pigment.
In the case of the baking soda and vinegar method, allow the paste to sit on the stain for a few minutes. As a result, the stain gets a chance to react with the mixture.
For the bleach and water method, let the bleach solution sit on the stain for a short period, about 5 to 10 minutes, and monitor the stain’s progress.
Conversely, if you are using the oxalic acid method, allow the paste to sit on the stains for a short period of time, following the manufacturer’s recommended time.
For commercial stain removers, allow the product to sit on the stain for the recommended time according to the product instructions.
Step 4: Scrub and Rinse
After allowing the paste or solution to sit, use a sponge or brush to scrub the stain in a circular motion. This will help to loosen up the purple shampoo stain and remove it from your shower surface. Be sure to apply some pressure while scrubbing to lift off the stain particles effectively.
Once you’re done scrubbing, rinse the area thoroughly with warm water. Rinse well until the water runs clear, leaving your shower clean and free from those pesky purple shampoo stains.
Can a magic eraser effectively remove purple shampoo stains from a shower?
A magic eraser can effectively clean purple shampoo stains from the shower. This cleaning tool is specifically designed to tackle tough stains and marks on various surfaces, including showers. Its micro-abrasive texture gently lifts and scrubs away stains without the need for harsh chemicals or cleaners.
How long does purple shampoo typically leave stains on a shower?
Purple shampoo can leave stains on a shower if left for 15 to 30 minutes. The longer the shampoo is left on the surfaces, the more pigments can adhere to the grout, tiles, or other materials, causing discoloration.
To prevent staining, be sure to rinse the shower surfaces promptly after using purple shampoo. It’s recommended to clean the shower regularly to avoid any buildup of pigments that can lead to lasting stains.
Does hydrogen peroxide remove purple shampoo stains from the shower?
You can effectively remove the stains caused by purple shampoo in your shower by using hydrogen peroxide.
To use hydrogen peroxide for stain removal, dampen a cloth or sponge with hydrogen peroxide and gently scrub the stained area on your shower walls. Let it sit for a few minutes before rinsing thoroughly with water.
Remember that hydrogen peroxide is a bleaching agent, so you need to test it on a discreet area first to ensure that it doesn’t cause any damage or discoloration.
Keep Your Shower Purple Shampoo Stain-Free
When your shower develops stubborn purple shampoo stains, you can use the methods mentioned above to eliminate them effectively.
You can restore your shower’s cleanliness with white vinegar, baking soda and vinegar, or commercial stain removers, all of which have their own strengths. Remember, the key lies in careful preparation, application, and patience during the waiting period.
You can also use a magic eraser for targeted stain removal. Make sure you wash your shower surfaces immediately after using purple shampoo to prevent prolonged staining. Choose the method that suits your situation and keep your bathroom looking its best.
